Fèy done ALUCOBEST®
4mm 0.50AL aliminyòm konpoze Panel
1.Prodwi konpozisyon
ALUCOBESTPanèl konpoze aliminyòm ® gen yon nwayo LDPE (polyethylene ki ba-dansite) ki mete sandwitch ant de po nan alyaj aliminyòm epè 0.5mm (3003 oswa 5005).
| Konpozisyon | Materyèl kouch: | PVDF |
| Materyèl po: | 0.5mm epè | |
| Materyèl debaz: | LDPE |
Se sifas la fini ak yon kouch PVDF wo-pèfòmans kòm estanda, bò dèyè se aliminyòm fini moulen oswa kouch sèvis pa Polyester.
2. Prodwi dimansyon epi tolerans
(1) epesè panèl: 4 mm
(2) Gwosè panèl: Creole Lajè = 1220mm, 1250mm
Espesyal Lajè = 1500mm, 1550mm, 2000mm
Longè = mwens pase 6000 mm
Remak: Longè koutim ka aksepte
(3) Tolerans pwodwi
Lajè: ± 2.0 mm
Longè: ± 3.0 mm
Epesè: ± 0.2 mm
Banza: Maksimòm 0.5% (5mm/m) longè oswa lajè Squareness (diferans dyagonal): Maksimòm 5.0mm
- Prpwopriyete yo
1) Pwopriyete mekanik materyèl konpoze aliminyòm (ACM):
| Tès atik | Estanda | Rezilta |
| Pwa inite | ASTM D792 | 5.81kg/m2 |
| Rezistans Tanperati Deyò | ASTM D1654 | Pa gen anomali |
| Ekspansyon tèmik | ASTM D696 | 3.0 × 10-5 / °C |
| Tanperati deformation tèmik | ASTM D648 | 115°C |
| Kondiksyon tèmik | ASTM 976 | 0.102 kcal/m.hr°C |
| Flexural frigidité | ASTM C393 | 14.0 x 105 |
| Rezistans enpak | ASTM D732 | 20kg.cm |
| Fòs adezif | ASTM D903 | 0.74kgf/mm |
| To izolasyon son | ASTM E413 | 29dB |
| Flexural Elastisite | ASTM D790 | 4055kg/mm2 |
| Chea rezistans | ASTM D732 | 2.6 kgf/mm2 |
| Minimòm reyon koube | ASTM D790 | >=300mm |
| Pwopagasyon dife | ASTM E84 | Kalifye |
| Lafimen devlope | ASTM E84 | <45 |
| Rezistans Van-Presyon | ASTM E330 | Pase |
| Pwopriyete kont dlo | ASTM E331 | Pase |
| Pwopriyete kont Air | ASTM E283 | Pase |
(2) Fini kouch PVDF
| Tès atik | Estanda | Rezilta |
| Fini epesè manto | ISO 2360 (CNS 8406) | >=26um |
| Gloss | ASTM D523-99 | 20-45% |
| Kreyon dite | ASTM D3363-00 | 2H |
| Severite | ASTM D4145-83 | 2T pa gen okenn rift |
| Fòs adezif | ASTM D3359-97 | 4B |
| Rezistans enpak | ASTM D2794-93 | > 100kg.cm |
| Rezistans abrasion | ASTM D968-93 | 64.6L/mil |
| Rezistans mòtye | ASTM D605.2-91 | 24hrs san anpoul |
| Rezistans imidite | ASTM D714-97;ASTM D2247-02 | 3000hrs pa gen anpoul |
| Rezistans dlo bouyi | ASTM D3359-B | Pase |
| Rezistans Sèl-Flite | ASTM B117-03 | 3000hrs pa gen anpoul |
| Rezistans asid | ASTM D1308-87 AAMA 605.2-91 TÈS #7 7.31 | Pa gen Efè |
| Rezistans alkali | ASTM D1308-87 | Pase |
| Rezistans solvants | ASTM D2248-73 ECCA T5 & NCCA NO.11-18 | Pase |
| Retansyon koulè | ASTM D2244-93 | △E=0.34 |
| Rezistans lakre | ASTM D4214-98 | Pa gen lakre |
| Retansyon Gloss | ASTM D2244-93 | 84.2% |