Lethathamo la lintlha tsa ALUCOBEST®
4mm 0.50AL Aluminium Composite Panel
1.Product tlhamo
ALUCOBEST® aluminium composite panel e na le LDPE(Low-Density Polyethylene) e kentsoeng lipakeng tsa matlalo a mabeli a 0.5mm thick aluminium alloy (3003 kapa 5005).
| Sebopeho | Lisebelisoa tsa ho roala: | PVDF |
| Lintho tsa letlalo: | Botenya ba 0.5mm | |
| Lintho tsa mantlha: | LDPE |
Bokaholimo bo phethetsoe ka "PVDF" ea ts'ebetso e phahameng joalo ka maemo a tloaelehileng, lehlakoreng le ka morao ke aluminium ea leloala kapa e koahetsoeng ka polyester.
2. Product dimension le mamello
(1) Botenya ba phanele: 4 limilimithara
(2) Boholo ba phanele: Bophara bo tloaelehileng = 1220mm, 1250mm
Bophara bo Khethehileng = 1500mm, 1550mm, 2000mm
Bolelele = ka tlase ho 6000 mm
Tlhokomeliso: Bolelele ba tloaelo bo ka amoheloa
(3) Mamello ea lihlahisoa
Bophara: ±2.0 mm
Bolelele: ±3.0 mm
Botenya: ±0.2 limilimithara
Seqha: Boholo ba 0.5% (5mm/m) ea bolelele kapa bophara ba Squareness (phapano ea diagonal): Boholo 5.0 mm
- Prmesebetsi
1) Mechini ea thepa ea Aluminium Composite Material (ACM):
| Ntho ea ho Leka | Standard | Sephetho |
| Boima ba Yuniti | ASTM D792 | 5.81kg/m2 |
| Ho hanyetsa Mocheso oa Kantle | ASTM D1654 | Ha ho Tloaelehileng |
| Katoloso ea Mocheso | ASTM D696 | 3.0×10-5 /°C |
| Thermal deformation Mocheso | ASTM D648 | 115°C |
| Thermal Conduction | ASTM 976 | 0.102 kcal/m.hr°C |
| Flexural rigidity | ASTM C393 | 14.0 x 105 |
| Tšusumetso ea ho hanyetsa | ASTM D732 | 20kg.cm |
| Matla a ho khomarela | ASTM D903 | 0.74kgf/mm |
| Sekhahla sa ho thibela molumo | ASTM E413 | 29dB |
| Flexural Elasticity | ASTM D790 | 4055kg/mm2 |
| Ho hanyetsa ho kuta | ASTM D732 | 2.6kgf/mm2 |
| Bonyane ba radius ea ho kobeha | ASTM D790 | > = 300mm |
| Phatlalatso ea mollo | ASTM E84 | Ea tšoanelehang |
| Ho hlahile mosi | ASTM E84 | <45 |
| Ho Hanyetsa Khatello ea Moea | ASTM E330 | Fetisitsoe |
| Thepa khahlano le metsi | ASTM E331 | Fetisitsoe |
| Thepa khahlano le Moea | ASTM E283 | Fetisitsoe |
(2) PVDF Coating Finish
| Ntho ea ho Leka | Standard | Sephetho |
| Qetella Botenya ba Coat | ISO 2360(CNS 8406) | = 26um |
| Khanya | ASTM D523-99 | 20-45% |
| Ho thatafala ha pensele | ASTM D3363-00 | 2H |
| Mathata | ASTM D4145-83 | 2T ha ho lekhalo |
| Matla a khomarelang | ASTM D3359-97 | 4B |
| Tšusumetso ea ho hanyetsa | ASTM D2794-93 | >100kg.cm |
| Khanyetso ea abrasion | ASTM D968-93 | 64.6L/mil |
| Seretse Resistance | ASTM D605.2-91 | Lihora tse 24 ha ho na blister |
| Ho hanyetsa mongobo | ASTM D714-97;ASTM D2247-02 | 3000hrs ha ho na blister |
| Ho hanyetsa metsi a belang | ASTM D3359-B | Fetisitsoe |
| Ho hanyetsa Letsoai-Spray | ASTM B117-03 | 3000hrs ha ho na blister |
| Ho hanyetsa asiti | ASTM D1308-87 AAMA 605.2-91 TEST #7 7.31 | Ha ho Phello |
| Ho hanyetsa alkali | ASTM D1308-87 | Fetisitsoe |
| Solvent resistance | ASTM D2248-73 ECCA T5&NCCA NO.11-18 | Fetisitsoe |
| Ho boloka mebala | ASTM D2244-93 | △E=0.34 |
| Khanyetso ea tjhoko | ASTM D4214-98 | Ha ho Chalking |
| Ho boloka Khanya | ASTM D2244-93 | 84.2% |