Akwụkwọ data ALUCOBEST®
4mm 0.50AL Aluminom mejupụtara Panel
1.Product mejupụtara
ALUCOBEST® aluminom mejupụtara panel nwere LDPE (Low-Density Polyethylene) isi sandwiched n'etiti skins abụọ nke 0.5mm aluminom alloy (3003 ma ọ bụ 5005).
| Ihe mejupụtara | Ihe mkpuchi: | PVDF |
| Ihe akpụkpọ ahụ: | 0.5mm ọkpụrụkpụ | |
| Isi ihe: | LDPE |
A na-emecha elu ya na mkpuchi PVDF dị elu dị ka ọkọlọtọ, akụkụ azụ bụ ihe igwe igwe rụchaa aluminum ma ọ bụ mkpuchi ọrụ site na polyester.
2. Product dimension na ndidi
(1) Ọkpụrụkpụ panel: 4 mm
(2) Nha panel: Standard obosara = 1220mm,1250mm
Obosara pụrụiche =1500mm,1550mm,2000mm
Ogologo = ihe na-erughị 6000 mm
Cheta na: Enwere ike ịnakwere ogologo omenala
(3) Nkwenye ngwaahịa
Obosara: ± 2.0 mm
Ogologo: ± 3.0 mm
Ọkpụrụkpụ: ± 0.2 mm
Ụta: Kacha 0.5% (5mm/m) nke ogologo ma ọ bụ obosara Squareness (iche diagonal): Kacha 5.0 mm
- Prarụ ọrụ
1) Ihe eji arụ ọrụ nke Aluminom Composite Material (ACM):
| Ihe na-anwale | Ọkọlọtọ | Nsonaazụ |
| Ibu nkeji | ASTM D792 | 5.81kg/m2 |
| Nguzogide okpomọkụ n'èzí | ASTM D1654 | Enweghị ihe ọjọọ |
| Mgbasawanye okpomọkụ | ASTM D696 | 3.0×10-5 /°C |
| Nrụrụ okpomọkụ Okpomọkụ | ASTM D648 | 115°C |
| Ntuziaka okpomọkụ | ASTM 976 | 0.102 kcal / m.hr Celsius |
| Isi ike na-agbanwe agbanwe | ASTM C393 | 14.0 x 105 |
| Nguzogide mmetụta | ASTM D732 | 20kg.cm |
| Ike nrapado | ASTM D903 | 0.74kgf / mm |
| Ọnụego mkpuchi ụda | ASTM E413 | 29dB |
| Mgbanwe mgbanwe | ASTM D790 | 4055kg/mm2 |
| Nguzogide shiee | ASTM D732 | 2.6kgf/mm2 |
| Obere mgbada kacha nta | ASTM D790 | > = 300mm |
| Mgbasa ọkụ | ASTM E84 | tozuru oke |
| Anwụrụ ọkụ malitere | ASTM E84 | <45 |
| Nguzogide Ikuku | ASTM E330 | Gafere |
| Njirimara megide mmiri | ASTM E331 | Gafere |
| Njirimara megide ikuku | ASTM E283 | Gafere |
(2) Emecha mkpuchi mkpuchi PVDF
| Ihe na-anwale | Ọkọlọtọ | Nsonaazụ |
| Mechaa Ọkpụrụkpụ Uwe | ISO 2360 (CNS 8406) | > = 26 um |
| Gloss | ASTM D523-99 | 20-45% |
| Isi ike pensụl | ASTM D3363-00 | 2H |
| Isi ike | ASTM D4145-83 | 2T enweghị mgbagha |
| Ike nrapado | ASTM D3359-97 | 4B |
| Nguzogide mmetụta | ASTM D2794-93 | > 100kg.cm |
| Nguzogide abrasion | ASTM D968-93 | 64.6 l/mil |
| Nguzogide Mortar | ASTM D605.2-91 | 24hrs enweghị ọnya |
| Nguzogide iru mmiri | ASTM D714-97; ASTM D2247-02 | 3000hrs enweghị ọnya |
| Nguzogide mmiri na-esi esi | ASTM D3359-B | Gafere |
| Nguzogide nnu-spray | ASTM B117-03 | 3000hrs enweghị ọnya |
| Nguzogide acid | ASTM D1308-87 AAMA 605.2-91 Nnwale #7 7.31 | Enweghị Mmetụta |
| Nguzogide Alkali | ASTM D1308-87 | Gafere |
| Nguzogide ihe mgbaze | ASTM D2248-73 ECCA T5&NCCA NO.11-18 | Gafere |
| Njide agba | ASTM D2244-93 | △E=0.34 |
| Nzu mgbochi | ASTM D4214-98 | Enweghị chalking |
| Njide gloss | ASTM D2244-93 | 84.2% |